New user's registration have been closed due to high spamming and low trafic on this forum. Please contact forum admins directly if you need an account. Thanks !

mldonky ???

Got problems with your B2 or B3? Share and get helped!
Post Reply
paolol61
Posts: 99
Joined: 20 Nov 2007, 04:18

mldonky ???

Post by paolol61 »

Hi i try to install mldonkey form apt
all seem to works fine, installation coplete ok.
but I can't log in the bubb:4080 page
so i try to find the downloads.ini and changed it to inclute local network user, but every time i restart the mldonkey server this file is rewritten as before .
So i'm stack in a loop.
thanks for help
scoobynz
Posts: 52
Joined: 10 Nov 2008, 17:11

Post by scoobynz »

Hi there,

I am having the exact same problem.

Installed mldonkey via apt-get. The files were installed to /var/lib/mldonkey

I then change the downloads.ini file to allow the ip of my desktop but when the bubba is restarted it just overwrites the changed downloads.ini with the original file (without my ips).

any suggestions?
scoobynz
Posts: 52
Joined: 10 Nov 2008, 17:11

Post by scoobynz »

Right.

I solved this by doing the following;
1) find process of mldonkey (ps -A)
2) kill the process (kill "PID")
3) with the process killed I altered the downloads.ini
4) restart server - hey presto, all ok.
paolol61
Posts: 99
Joined: 20 Nov 2007, 04:18

Post by paolol61 »

Hi, i tryed but no good result.
I removed all the flies and unistalled the mldonkey-server
Then I did the apt-get install make mldonkey-server
but get an error about a line 262
and it seem not to be able to work :/
uninstalled again and removed the mldonkey user
Any suggestion ?
Thanks
scoobynz
Posts: 52
Joined: 10 Nov 2008, 17:11

Post by scoobynz »

Hi,

I fiddled for ages to get this going and can confirm that this link http://forum.excito.net/viewtopic.php?t=88 is the correct way and should help you out. Uninstall mldonkey-server using apt and remove the files and then start again in accordance with the link.

Download the latest version of mldonkey from the mldonkey site

Do not run mldonkey as su

take a look at my comments at the bottom of the link.
paolol61
Posts: 99
Joined: 20 Nov 2007, 04:18

Post by paolol61 »

thanks a lot.
now is up :)
I run it manually, did you know how to add it to the startup sequence ?
So if power fail + UPC fail it will be up on the next startup :D
8)
scoobynz
Posts: 52
Joined: 10 Nov 2008, 17:11

Post by scoobynz »

No worries.

No I dont know how to do the startup script. That is my next challenge. If someone can help us would be good - otherwise give us a week or so to sort it out in my spare time (have to do the housework this weekend instead :D )
Post Reply